Choosing Upvc Window Replacement Hinges
It's not as difficult as it may seem to choose and fit upvc replacement hinges. It is essential to verify that the arrow on the hinges are facing the right way and the thickness (13mm or 17mm) of the hinge arm on the open frame.
There are many different types of hinges to choose from, each one with distinctive features. This article will discuss the most commonly used types of uPVC window hinges and their advantages.
Egress/Easy Clean Hinge
They are a great option to replace or upgrade your fire escape safety window because they can open to a full 90 degree angle. They can also be removed to an easy clean position to allow you to easily access the exterior of windows to clean them without climbing a ladder or lean over at potentially dangerous angles.
These egress hinges are heavy-duty and are manufactured by Yale one of the most popular and reliable home security brands on the market today. These hinges are suitable for any kind of uPVC side-hung windows. By pressing a small button the window sash can be moved to the side and into the clean position. Once closed, the window sash will return to its original position.
They are available in both 13mm and 17mm stack heights. Based on the size of your window, we recommend using our Egress Selection Guide to determine the best product for you.
The hinges are designed to be used with standard side-hung frames that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the chance of a mishap during high winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is simple to operate and provides a simple solution to emergency egress as well as safe cleaning. Use the hinge retention clip located in the inner corner of the bottom corner. This will release the top and bottom catches and allow you to slide the sash back into the clean position. Close the window when you have the sash in the easy-cleaning position. This will set the hinges back to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows for fire safety reasons. They allow for an opening larger in the event of fire. Building regulations stipulate that this type of hinge has to be set in any habitable space with windows.
The windows feature the benefit of a friction stop that allows them to open at 90 degrees. They also let the opening sash to slide over the glass when it's opened and allows for easy cleaning without the need to climb ladders. The hinges have no fiddly buttons or catches, and operate with a simple, safe lever that can be accessed from the inside of the home.
The hinges are produced in the UK by Cotswold and come complete with a child safety restrictor for day-to-day use that can be reverted by a hidden button, providing you with peace of mind that your children won't accidentally open the window too far. They are available in 13mm and 17mm stack heights.
To purchase these hinges, measure the length of your current side hung window hinge that is fixed to the frame (see the guidelines for measuring the length of your window hinges made of upvc). Then select the correct size hinge from the options below.
Please note that this measurement is taken from the part of the hinge that attaches to the frame and not the sash. The actual hinge length may be shorter or longer depending on the way your windows were made in the past. When deciding the width of the hinge the majority of frames made of upvc can accommodate the 13mm stack height, but if your old window frame is 17mm, choose this option. You can also utilize the 4mm packer to make up for the difference. All hinges are in two different directions (1 left and one right). Screws aren't included with the hinges. These can be bought separately if you require. upvc door hinge repairs near me made of upvc are highly recommended. They are specifically designed to improve the performance of your hinges, allowing them to operate smoothly for longer. They feature a design with reduced friction and an enhanced weather seal that includes a nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open a window fully. These child safety friction hinges are an excellent way to solve this problem. They can be used in situations where ventilation is required but cleaning or escape from the flame is not possible. They limit the possibility of opening the sash, and allow overriding this restriction by pressing the button. They are available in 13mm or 17mm stack heights and are suitable for both top and side hung windows.
The Nico Restricted Egress Friction Hinge combines the advantages of a standard restrictor and an escape hinge to provide an efficient and easy way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used for both top and side opening uPVC window. It comes in a pair that has one hinge which is the one with restricted egress and the other being the unrestricted. This lets one hinge be installed at the bottom and the other is installed on top.
These uPVC restrictive hinges have been tested to BS6375, part 2. They are intended for use on a window that cannot be fully opened such as a small children's bedroom. The mechanism limits the amount the sash is able to open to the safety level of 100mm and re-engages when the window is closed.
Like the other types of uPVC friction hinges they can be installed on any type of window and are perfect for difficult to access windows above the ground three-storey flats, or those that would normally require a ladder for access to them. They can be complemented by our security enhancements like hinge guards and protection plates, or dog bolts to provide PAS 24 performance.
When replacing a window hinge it is important to measure the length of the current hinge so that you can purchase replacements that are similar in size. This can be accomplished by looking at the picture gallery of the hinge before deciding the best place to put it. The top-hung hinges can only be placed on one side, whereas the side hung ones can only be positioned on one side.
Standard Hinge
A standard hinge is made of metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes, and is fire-rated. For a quick way to determine the radius of your hinge, lay it flat and line up the quarter and dime in two corners. If the dime fits better than the quarter, the corner is rounded by 1/4 inch; if the quarter fits better, it's rounded by 5/8 inch.
Choosing the right type of hinge can be the difference between making or breaking your door's appearance. Achieving the same style and design of your hinges with your door will create an attractive and well-integrated appearance.